Backlit prints
Look for “Lightbox Compatible” in the MakerWorld listing. In room light you see the surface colours. With light behind the print, thinner or more translucent areas glow.
What changes when the light comes on?
The same Nissan Skyline GT-R Generations panel is shown below in room light and with the backlight on. Look at the four cars below Mount Fuji. The backlight picks out their tail lights, the reflections on the road and the red sun. GT-R Generations on MakerWorld
A landscape and a portrait


Fit the panel in its frame
- Choose a frame profile that matches the panel’s width and height. To resize the artwork, turn off Uniform scale. Change X and Y by the same percentage. Keep the original Z thickness. Modular HueForge Lightbox Frame Set · Resizing example
- Fit the light board in the base with the LEDs facing the artwork. Run the USB cable through the opening at the back.
- Place the diffuser between the board and the artwork if you’re using one. Fit the artwork facing out. Slide the front frame over the base and switch on the light.



